Differences

This shows you the differences between two versions of the page.

--- netware [2025/01/13 16:41] – khorvath
+++ netware [2025/01/14 17:24] (current) – [Installing TCP/IP] khorvath
@@ Line 16: / Line 16: @@
 === Install DOS ===
-Start by installing a copy of DOS on the machine. I use MS-DOS 6.22 but DR-DOS will work fine too. I have not tried FreeDOS.
+Start by installing a copy of DOS on the machine. I use MS-DOS 6.22 but DR-DOS will work fine too. I briefly attempted to use FreeDOS but the NetWare installer hung at the EULA screen.
 === Partitioning ===
@@ Line 60: / Line 60: @@
 ==== Installing TCP/IP ====
-Installing TCP/IP is fairly straightforward from INSTALL.NLM. However, if you run into an error that TCP/IP is not configured mid-install, you'll need to switch consoles and run ''LOAD INETCFG''. Make sure you enable the TCP/IP protocol and bind it to your interface with ''ETHERNET_II''.
+Installing TCP/IP is fairly straightforward from INSTALL.NLM. However, if you run into an error that TCP/IP is not configured mid-install, you'll need to switch consoles (in libvirt run ''qemu-monitor-command <domain> --hmp "sendkey alt-esc"'' and run ''LOAD INETCFG''. Make sure you enable the TCP/IP protocol and bind it to your interface with ''ETHERNET_II''.
 ===== More Resources =====